DMG Mori NT4300DCG/1500S Multi-Axis CNC Turning Center
Specifications (subject to buyer verification):
Capacity
Max. swing of workpiece 28.7”
Max. turning diameter 25.9”
Max. turning length 58.9”
Bar work capacity 3.5”
Travel
X-axis travel / Y-axis travel <Tool spindle> 29.5” / ±8.3”
Z-axis travel <Tool spindle> ＋ for ATC 61” + 3.9”
B-axis rotation range <Tool spindle> ±120°
Spindle 1 / Spindle 2 (Option)
Max. spindle speed 3,000 RPM <Spindle 1 /Spindle 2 >
Spindle nose JIS A2 -8 <Spindle 1> JIS A2 -8 <Spindle 1 / Spindle 2>
Tool spindle <Turret 1>
Min. B-axis indexing increment 1°
Max. tool spindle speed min-1 12,000 RPM
Taper hole of tool spindle CAPTO C6
Tool storage capacity Chain type: 100 ATC
Max. tool diameter
<With adjacent tools / Without adjacent tools> 2.7” / 5.5”
Max. tool length mm 15.7”
Max. tool mass 17.6 lbs
Feedrate
Rapid traverse rate Tool spindle X: 1968 IPM Y: 1181 IPM Z: 1968 IPM
Spindle 2 A: 1181 IPMB: 1574 IPM
Motors
Spindle 1 drive motor <30 min / cont> 30/25 HP
Spindle 2 drive motor <30 min / cont> kW (HP) 30/25 HP
Tool spindle drive motor <10 min / cont> 25/15 HP
Floor Space (With Chip Conv.) 128” x 55” x 115”
Equipped With (subject to buyer verification):
FANUC Series 31iA5 CNC Control
Tool Spindle Full Indexing Specifications
Spindle 2 Tailstock Specifications
Tool Storage Capacity 100 Tools (Capto C6)
Chuck Top Coolant for Spindle 1
Chuck Top Coolant for Spindle 2
Prep Only Super High Pressure Coolant System I/F
Prep Only Mist Collector
Air Blow for Chuck (Spindle 1)
Air Blow for Tool Tip (Tool Spindle)
Prep for Renishaw MP700 Probe)
Tool Presetter
Parts Catcher + Workpiece Conveyor
Automatic Door
Ethernet I/P I/F
5 External M-Codes
Programming Resolution Multplied by 1/10
Part Program Storage Length 8MB + Registerable Programs 4,000 in Total
Inverse Time Feed
Program Number 8-Digit O code
Program Restart
Tool Axis Direction Handle Feed
ESPRIT for MAPPS
Through Spindle Coolant / Air Switching Specification by M Code
Chip Conveyor (Hinge Belt, RH Side)
High Pressure Coolant Unit JV-40 w/CSA) Chip Blaster
Spindle 1: 12” Kitagawa Chuck
Spindle 2: 12” Kitagawa Chuck