DMG Mori NTX2000SZ/1500 – 2016

DMG Mori NTX2000SZ x 1500
C

2016 DMG Mori NTX2000SZ x 1500
CNC MILL TURN CENTER

General Specifications (subject to buyer verification):

Maximum workpiece swing diameter mm (in.) 660 (25.9)
Swing over cross slide:
– Standard mm (in.) 660 (25.9)
– Turret 2 mm (in.) 300 (11.8)
Maximum turning diameter:
– Standard mm (in.) 610 (24.0)
– B-axis 90° mm (in.) 660 (25.9)
– Turret 2 mm (in.) 274 (10.7)
Maximum turning length mm (in.) 1,540 (60.6)
Bar work capacity:
For 80 mm (3.1 in.) bar work capacity specifications mm (in.) [80 (3.1)]

Travel
X-axis mm (in.) 495 (19.5 )
Y-axis mm (in.) 125 (4.9)
Z-axis mm (in.) 1,560 (61.4) +215 (8.5)
B-axis 120°
X2-axis mm (in.) 160 (6.3)
Z2-axis mm (in.) 1,402 (55.2)

Spindle 1
Maximum spindle speed:
– For 80 mm (3.1 in.) bar work capacity specifications min-1 [4,000]
Number of spindle speed ranges 1
Type of spindle nose:
– For 80 mm (3.1 in.) bar work capacity specifications [A2-8]
Through-spindle hole diameter:
– For 80 mm (3.1 in.) bar work capacity specifications mm (in.) [91 (3.6)]
Minimum spindle indexing increment 0.0001°
Spindle bearing inner diameter:
– For 80 mm (3.1 in.) bar work capacity specifications mm (in.) [140 (5.5)]

Spindle 2
Maximum spindle speed min-1 5,000
Number of spindle speed ranges 1
Type of spindle nose A2-6
Through-spindle hole diameter mm (in.) 73 (2.9)
Minimum spindle indexing increment 0.0001°
Spindle bearing inner diameter mm (in.) 120 (4.7)
Spindle torque N·m (ft·lbf) 230/178/159 (169.6/131.3/117.3)

Tool spindle
Number of tool stations 1
Minimum B-axis indexing increment 0.0001°
Maximum tool spindle speed min-1 12,000
Taper hole of rotary tool spindle
Type of retention knob DMG MORI SEIKI 90°

Inner diameter of rotary tool spindle bearing mm (in.) 70 (2.7)
Tool storage capacity 76
Maximum tool diameter mm (in.) 70 (2.7)
Maximum tool diameter mm (in.) 125 (4.9)
Maximum tool length mm (in.) 300 (11.8)
Maximum tool mass kg (lb.) 8 (17.6)
Tool changing time sec 1.25
Spindle torque N·m (ft·lbf) 120/44 (88.5/32.5)

Turret 2
Number of tool stations 10
Turret Indexing time sec 0.19
Shank height for square tool mm (in.) 20 (0.8)
Diameter of boring bar shank part mm (in.) Max. 32 (1.2)

Feedrate
Rapid traverse rate:
– X-axis mm/min(ipm) 40,000 (1,574.8)
– Y-axis mm/min(ipm) 40,000 (1,574.8)
– Z-axis mm/min(ipm) 40,000 (1,574.8)
– X2-axis mm/min(ipm) 30,000 (1,181.1)
– Z2-axis mm/min(ipm) 38,000 (1,496.1)
– A-axis mm/min(ipm) 30,000 (1,181.1)

Motors
Spindle 1 drive motor kW (HP) 22/18.5 (30/24.7)
Spindle 2 drive motor kW (HP) 22/18.5 (30/24.7)
Tool spindle drive motor kW (HP) 18.5/11 (24.7/15)

Power Sources
Electrical power supply kVA 79.9
Compressed air supply MPa (psi), L/min (gpm) 0.5 (72.5), 650 (171.6)

Machine Size
Machine height mm (in.) 2,621 (103.2)
Floor space mm (in.) 4,080 x 2,980 (160.6 x 117.3)
Mass of machine: – Tool storage capacity: 38 tools kg (lb.) 15,270 (33,594)

F31iB5 with CELOS – ERGOline Touch Control
Spindle 1 Through Hole 91mm Bore / 4000 RPM / 35HP
10” Chuck Main Spindle
10” Chuck 2nd Spindle
Tool “Storage Capacity 76 Tools (HSK-A63)
Chip Conveyor Right Dischage Hinge Type
Renishaw OMP60
Barfeed Interface
Part Program Storage Length 1 MB
Registerable Programs 1000 in Total
Chamfering/corner R
Coordinate System Rotation