Doosan Puma 3100LY – 2018

Doosan Puma 3100LY
Multi-Axis CNC Turning Center
Specifications (subject to buyer verification):
CAPACITY:
Swing over bed 33.46″
Swing over front door 33.46”
Swing over carriage 26.38″
Maximum bar capacity 4”
Maximum turning diameter 16.53″
Maximum turning length 50.4”
MAIN SPINDLE:
Spindle speed 2,800 RPM
Spindle nose ASA-A2-11
Draw tube I.D. 4.05″
Spindle bore diameter 4.52″
AC high torque spindle motor (30 min rating) (P3100Y / 3100LY) 30 HP
MAIN SPINDLE C-AXIS:
Minimum programmable angle (degrees) .001
Rapid traverse rate (RPM) 200
BED, SADDLE, & CROSS SLIDE:
X axis travel 11.53”
Z axis travel – Puma 53.15”
Angle of slant bed 30 degrees
X axis rapid traverse rate 1,181 IPM
Z axis rapid traverse rate – Puma 3100Y,LY,XLY 1,181
TURRET:
Number of tools 12
Number of index positions 12
Turning tool shank size 1.0″
Boring bar diameter 2.0″
Turret index time (next station swivel time) 0.15 sec.
Tool selection Bi-directional
ROTATING TOOLS:
Rotating tool RPM 50 – 5,000 RPM
Rotating tool spindle motor (15 min rating) 7.5 Hp
Rotating tool torque (15 min rating) 34.7 ft-lbs
Max. X-axis tool length with Y-axis in any position 3.4”
Y-AXIS:
Y-axis travel 5.12” (±2.56”)
Y-axis rapid traverse rate 394 IPM
TAILSTOCK:
Tailstock type Programmable
Tailstock quill diameter 4.72″
Tailstock quill stroke 4.72″
Maximum tailstock quill thrust / maximum hydraulic pressure 4,316 lbs. / 725 PSI
Tailstock spindle taper – Puma 3100Y, LY MT #4
Tailstock guide way span 13.2”
GENERAL:
Floor space (Length X Width) – Puma 3100LY 169” x 82”
Machine height 91.2”
Height from floor to spindle center 46.5”
Net weight – – Puma 3100LY 17,640 lbs
Voltage required 205 – 235 volt / 3 phase
Power requirement: – Puma 3100Y / 3100LY 47 KVA (123 amps at 220 volts)

Equipped With (subject to buyer verification):
Doosan-Fanuc I Series CNC Control
Steady Rest Base Only
High Pressure Coolant Pumps
Tool Presetter
Tailstock
Chip Conveyor
Y-Axis
Milling
**Chip Blaster – High Pressure Coolant Unit (**Must be confirm if included)