Doosan Puma 5100C CNC Turning Center
Specifications (subject to buyer verification):
CAPACITY:
Swing over bed 900 mm (35.4″)
Swing over carriage 690 mm (27.16″)
Maximum turning diameter 650 mm (25.6″)
Maximum turning length 1,032 mm (40.6″)
Distance between spindle nose and tailstock center 1,261 mm (49.64″)
SPINDLE:
Spindle speed 1,000 rpm
Spindle nose ISO 702-4 #20
Spindle bore diameter 275 mm (10.82″)
AC spindle motor (30 min. rating) 45 kW (60 hp)
Spindle speed ranges 2
Maximum spindle torque (30 min. rating) 4,463 Nm (3,291 ft-lb)
BED, SADDLE & CROSS SLIDE:
Angle of slant bed 45 degree
X axis travel 362 mm (14.3″)
Z axis travel 1,105 mm (43.5″)
X axis guide way span 360 mm (14.2″)
Z axis guide way span 420 mm (16.5″)
X axis rapid traverse rate 16 m/min (630 ipm)
Z axis rapid traverse rate 20 m/min (790 ipm)
TURRET:
Number of tools 12
Tool holder type BMT-KEY
Turning tool shank size (metric turret 32 mm) 1.25″
Boring bar diameter (metric turret 80 mm) 3.0″
Turret index time (next station swivel time) 0.25 second
Tool selection Bi-directional
Turret clamping force 142 kN (31,920 lb)
Turret head thickness 126 mm (5.0″)
Turret index repeatability ±0.0005 degree
TAILSTOCK:
Tailstock center MT #5 built-in dead
Tailstock quill diameter 120 mm (4.7″)
Tailstock quill stroke (programmable) 120 mm (4.7″)
Tailstock body stroke 1,000 mm (39.4″)
Maximum tailstock quill thrust 14.3 kN (3,210 lb)
Maximum tailstock hydraulic pressure 40 bar (580 psi)
Tailstock guide way span 300 mm (11.8″)
GENERAL:
Machine weight 10,650 kg (23,480 lb)
Floor space – length x width 4,759 mm x 2,055 mm (187.5″ x 81″)
Floor space – length with hinge belt chip conveyor 5,918 mm (233″)
Machine Height 2,194 mm (86.4″)
Height from floor to spindle center 1,163 mm (45.8″)
Voltage required 205-235V/3 ph/60 Hz
Power requirement 61 kVA (160 Amps @ 220 Volts)
Equipped With (subject to buyer verification):
Doosan-Fanuc I Series (FANUC 0i-TD)
Chip Conveyor
Variable Speed Threading
75Kva Step Down Transformer 480V Primaary to 220V
145 PSI Coolant Pump
Custom Macro B (w/Extended Varables 600) Including AAPI Pin Connection Program
G-10 Programmable Data Input
Spindle Orientation
Front and Rear ATS System BT10.8ES Pneumatic Chucks with 10.8” Thru Hole, Selector Switch and Jaw Jogging
Rear Chuck Guard for Pneumatic Chuck
Tailstock
