Doosan Puma SMX-3100 – 2015

Doosan Puma SMX3100 Multi-Axis Lathe

CAPACITY:
Swing over bed (660mm) 25.98″
Swing over carriage (660mm) 25.98″
Maximum bar capacity (102mm) 4.015”
Maximum turning diameter, main spindle (660mm) 25.98″
Max. permissible weight (including chuck) chuck work (390kg) 860 lbs
Maximum turning length (1540mm) 60.63”

LEFT SPINDLE:
Chuck size (310mm) 12”
Spindle speed 3,000 RPM
Spindle nose A2-11
Left spindle drawtube ID (103mm) 4.055”
Spindle bore diameter (115mm) 4.52″
AC high torque spindle motor (S2 30 min. rating) (30kW) 40 HP
Maximum spindle torque (S2 30 min rating) (1203N.m) 887 ft-lbs

LEFT SPINDLE C-AXIS:
Minimum programmable angle (degrees) .0001
Rapid traverse rate (RPM) 200
C1-axis repeatability +/- .003 deg.
C1-axis positioning accuracy .0042 deg.

MILLING SPINDLE
Spindle speed 12,000 RPM
Motor power (S3 25% ED) (26kW) 35 HP
Maximum spindle torque (S3 10% ED) (124N.m) 91 ft-lbs
Tool index (2, 3 or 4 insert multi-tools) 15 deg.
B-axis (tilt) coupling increment Random Angle
B-axis clamping torque (Max. without brake) (5,931Nm) 4374 ft-lbs
(Min. with low brake) (141Nm) 104 ft-lbs
B-axis travel 240 (+/- 120) deg.
B-axis minimum increment 0.0001 deg
B-axis positioning accuracy 0.0042 deg.
B-axis repeatability +/- 0.003 deg.

BED, SADDLE, & CROSS SLIDE:
X1 (upper) axis travel (630mm) 24.8”
Z1 (upper) axis travel (1585mm) 62.4”
Angle of slant bed 0 degrees
X1 axis rapid traverse rate (48m/min) 1,890 IPM
Z1 axis rapid traverse rate (48m/min) 1,890 IPM
X / Z axis ball screw diameter (40 / 50mm) 1.57″ / 1.97”
X1 axis feed thrust (continuous/intermittent) (12561 / 18842N) 2,823 / 4,235 lbs
Z1 axis feed thrust (continuous/intermittent) (11946 / 17918N) 2,685 / 4,028 lbs
Y axis feed thrust (continuous/intermittent) (9195 / 13793N) 2,067 / 3,100 lbs
X axis repeatability (+.002mm) + 0.00008″
Z axis repeatability (+.003mm) + 0.00012″

TAILSTOCK (Servo Driven):
Maximum tailstock quill thrust (10kN) 2,248 lbs
Tailstock travel (1562mm) 61.5”
Tailstock spindle taper (built-in type) MT #5
Tailstock guideway span (390mm) 15.35”

Y-AXIS:
Y-axis travel (300mm) 11.81” (+/- (150mm) 5.9”)
Y-axis rapid traverse rate (36m/min) 1,417 IPM
Y-axis repeatability (+.003mm) + 0.00012″

ATC:
Tool holder type CAPTO-C6
Tool storage capacity 40 (Opt. 80)
Max. tool diameter (90mm) 3.54”
Max. tool diameter w/o adjacent tools (130mm) 5.12”
Max. tool length (450mm) 17.7”
Max. tool weight (12kg) 26.4 lbs.
Tool selection method Fixed
Tool change time (tool to tool) 1.8

COOLANT SYSTEM:
Milling spindle coolant pump pressure (10 bar) 145 PSI
Milling spindle coolant pump motor (2.2kW) 3.0 HP
Coolant tank capacity (560L) 148 gallons

HYDRAULIC / LUBRICATION:
Hydraulic tank capacity (26) 6.8 gal.
Hydraulic oil requirement (or equivalent) Mobil DTE #24 or Shell Tellus 32
Way lubrication tank capacity (4.3L) 1.1 gal.
Way lubrication oil requirement (or equivalent) Mobil Vactra #2 or Shell Tonna T68
Main / sub-spindle oil chiller tank capacity (30L) 7.9 gal.
Main / sub-spindle oil chiller oil requirement (or equivalent) Mobil Velocite #6 or Shell Tellus C10

GENERAL:
Floor space (length x width) (4900 x 3010mm) 193” x 119”
Floor space – Length with hinge belt chip conveyor (6170) 243”
Net weight (16300kg) 35,940 lbs.
Machine height (2761mm) 109”
Height from Floor to spindle center line (1290mm) 50.78”
Voltage required 205-235 Volt / 3 phase
Power requirement 68 kVA (178 Amps @ 220 Volts

Fanuc Control
Hydraulic Tailstock
80 Station Tool Storage Cap.
Y Axis
Milling Head
(35) Capto C6 Tool Holders