Edge FMB Minimag 2-20 – 2013

Edge FMB Minimag 2-20
Automatic Bar Loading Magazine Bar Feeder

Specifications (subject to buyer verification):
Bar diameter capacity-no bar preparation: 2 mm to 20 mm (.078” to .787”)
Bar diameter capacity-with bar preparation: 2 mm to 23 mm (.078” to .905”)
Maximum bar length: 3800 mm (12 feet 5 inches)
Minimum bar length: 1000 mm (39.400”)
Maximum remnant length: 420 mm (16.540”)
Magazine rack capacity: 7”
Bar loading cycle time: 25 seconds for 12 foot bar
Material straightness specification: .007” TIR/foot of material (V blocks, 3 points equidistant)
Feed force (pusher torque): max 300 N, adjustable
Forward feed rate: 710 inches/minute max, adjustable
Return feed rate: 1420 inches/ minute max, adjustable
Power consumption: 1.5 kW – (2 kVA)
Operating voltage: 230V/60Hz 3-phase
Control voltage: 24V DC
Oil capacity: 50 liters (13.2 gallons)
Oil viscosity: ISO 100 cST
Compressed air supply: 6 bar (90 psi)
Compressed air consumption: approx. 4 liters per loading cycle
Machine weight (without oil): 1,650 lbs

Equipped With (subject to buyer verification):
•Bar diameter capacity: 2 mm to 20 mm (.078” to .787”)
•Automatic loading magazine — 7 linear inches of rack capacity
•Polyurethane guide channel system — noise & vibration dampening
•Ultra quick change guide channels and pusher —10 minute full changeover, 3 minute changeover within same channel set
•Hydrodynamic support via high volume oil flow into channels
•Omron motion control — dependable and user friendly, allows easy bar feeder parameter changes
•Bearing block steady rest. Super rigid design is mounted to base of the machine to provide maximum support of bar stock and pusher
•Separate floor mounted electric cabinet isolates electronics from vibration
•Swiss headstock synchronization device
•Automatic remnant retraction, self centering gripper
•Custom lathe cable and interface plugs