Emco MaxxTurn 65SMY – 2007

SKU: Emco-MaxxTurn-65SMY-2007 ,

 

2007 Emco MaxxTurn 65 SMY

Multi-Axis CNC Turning Center with Sub Spindle, Y-Axis, Milling

Specifications (subject to buyer verification):

Main spindle:

• Spindle nose A2-6“ (DIN 55026)

• Bar capacity: 65mm 2.55”

• Max. power: 29 kW (39 hp)

• Speed range: 0-5000 rpm

Counter spindle:

• Spindle nose A2-6“ (DIN 55026)

• Max. power: 22 kW (29 hp)

• Speed range: 0-7000 rpm

 

Tooling system:

• 12-station VDI 30 radial tool turret with bi-Directional logic for driven tools.

Turret indexing speed adjustable by the Feedrate override switch.

o Power: max. 6.7 kW (9 hp)

o Torque: max. 25 Nm

o Speed range: 0-5000 rpm

o C-axis on the main and counter spindle

 

Y- Axis:

• Travel range: +/-40mm (+/- 1.57)

• Rapid rate: 12m/min

 

Equipped With (subject to buyer verification):

• Fanuc 18i TB control

• Cooling system for integrated spindle motor

• Through-hole clamping cylinder including draw tube

• EMCO-Interface for bar loader/feeder

LNS Quick Load Servo S3 Barfeeder

• MANUALGUIDE conv. programming

• Interface RS 232

• Machine lamp

• Coolant system

– 1 pump @ 3.5 bar for turret 50.75 psi

– 1 pump @ 3.5 bar to keep the working area clean

• Parts ejector and coolant through the counter-spindle

• Air conditioned electrical cabinet

• Hydraulic unit

• Interface for foot pedal switch and chip conveyor

• Multi Tap Transformer 220/440V

• CE certificate

* X3Z 140 EMCO TOOL LOAD MONITORING – This system is used to check the tool load during the machining. If the current load exceeds the set values for tool breakage, tool wear or tool missing, the machine will shut-off immediately.

 

Programs can be stored on a Compact Flash card with a memory of 256MB.

 

Tooling:

2 OD double side turning holders for 1″ shank

2 OD main spindle turning holders for 1″ shank

1 R4Z 560 ID tool holder left – 25 mm, 120 mm long

2 R4Z 510 ID tool holder right-25 mm,120 mm long

2 double end boring holder R6Z 440

1 cut-off holder (1 1/4″ shank)

ID tool holder – right (R4Z 500 but 1 1/4″ not 32mm)

1 ID tool holder – left (R4Z 550 but 1 1/4″ not 32mm)

1 R6Z 450 double ID tool holder 25 mm 120 mm long

1 R6Z 440 double ID tool holder 32 mm 100 mm long

3 live tool holders – radial – coolant thru

2 live tool holders – axial – non coolant thru

1 double axial milling/drilling holder- ER25 collet type

 

Workholding:

2 S-26 dead length collet chucks

2 8″ 3 jaw chucks – Kitagawa or compatible