FANUC ROBODRILL D21MiB5 Adv PLUS K60 AUTOMATION SYSTEM 65/60
S
FANUC ROBODRILL ALPHA D21MIB5 ADV
SPECIFICATIONS:
TABLE LENGTH 25.6″
TABLE WIDTH 15.74″
TABLE CAPACITY 880 lb
X-AXIS TRAVEL 19.68″
Y-AXIS TRAVEL 15.74″
Z-AXIS TRAVEL 15.74″
SPINDLE SPEED 24,000 RPM
SPINDLE MOTOR 7.5 hp
SPINDLE TAPER BT 30 (BIG PLUS)
TOOL CAPACITY (ATC) 21
RAPID TRAVERSE – X/Y AXIS 2,125 in/min.
RAPID TRAVERSE – Z-AXIS 2,125 in/min.
CUTTING FEEDRATE 1181 ipm
ROTARY OR TRUNNION Yes
APPROX MACHINE WEIGHT 4,850 lb
APPROX MACHINE DIMENSIONS 62″ X 80″ X 110″
DIMENSIONS 62″ X 80″ X 110″
WEIGHT 4850 LBS
EQUIPPED WITH:
AUTOMATION CELL DESCRIPTION
– THE PLUS-E AUTOMATION SYSTEM FOR THE FANUC ROBODRILL IS BASED AROUND A SPACE SAVING ELEVATOR SYSTEM MANIPULATING A STACK OF PALLETS. THE SYSTEM WILL PULL OUT ONE PALLET, ALLOWING ACCESS BY THE ROBOT TO TAKE THE RAW PARTS TO LOAD/UNLOAD INTO THE ROBODRILL, AND PLACING THE FINISHED MACHINED PARTS BACK ONTO THE PALLET. WHEN THE PALLET HAS BEEN EXHAUSTED, THE FINISHED PALLET IS PUSHED BACK INTO THE STACK, THE ELEVATOR WILL RAISE UP AND PULL OUT A NEW PALLET FOR ACCESS BY THE ROBOT. THE STACK OF PALLETS IS EASILY ACCESSIBLE THROUGH THE CONVENIENT FRONT DOOR.
AUTOMATION CELL SPECS:
MAX WEIGHT OF PART………………… 2 LBS
PALLET STORAGE HEIGHT…………… 36.6″
PALLET SPACING…………………………. 10 MM INCREMENTS
PALLET SIZE………………………………… 15.75″ X 23.6″
OUTSIDE DIMENSIONS OF UNIT…….. 67″ X 30″ X 83″
UNIT WEIGHT………………………………… 1200 LBS
ROBOT SYSTEM:
FANUC LR MATE 200ID 6-AXIS ARTICULATING ARM INDUSTRIAL GRADE ROBOT WITH R-30IB MATE CONTROLLER INCLUDING:
* END OF ARM TOOLING SYSTEM INCLUDING: (2) PNEUMATIC, PARALLEL CLOSE, TWO JAW GRIPPERS WITH CLOSET POSITION SENSOR
* ROBOT ELECTRICS: 200-230V/ 1PH, 50/60 HZ, 1.2 KVA
ADDITIONAL EQUIPPED WITH:
(60) BT-30 TOOL HOLDERS INCLUDED IN SALE
FANUC SERIES 31I-MODEL B5 CNC CONTROL
TSUDAKOMA TWA-130 K-1 5-AXIS TRUNNION TABLE
RENISHAW OTS TS 27R TOOL PROBE
RENISHAW OMP 400 SPINDLE PROBE
HENNIG LEFT SIDE DISCHARGE CHIP CONVEYOR
EDGE TECHNOLOGIES VORTEX 0S-550 MIST COLLECTOR
SPINDLE AIR BLOW
MMT HIGH PRESSURE COOLANT SYSTEM (1000 PSI)
COOLANT LEVEL FLOAT SWITCH MACHINE ALARM
TAPER SHANK CLEANING FLUSH
(1) SCHUNK TYPE PNEUMATIC VISE AND VISE JAWS
(25) ALUMINUM BASE PALLETS
(1) CUSTOM END OF ARM TOOLING FOR 11.8″ X 8″ PARTS (UNIQUE TO CURRENT CUSTOMER’S PART)
ETHERNET
PCMIA SLOT
ADDITIONAL I/O UNIT
I/O DEVICE EXTERNAL CONTROL
FAST DATA SERVER FUNCTION WITH 2G
A1 CONTOUR CONTROL II
UP TO 1000 BLOCK LOOK AHEAD
NO Z-AXIS WAY INTERFERENCE IN Y-AXIS
BBT-30 SPINDLE TAPER WITH BIG PLUS DUAL CONTACT SPINDLE
SERVO DRIVEN 21 POSITION BI-DIRECTIONAL TOOL CHANGER (NEW DESIGN)
RIGID TAPPING UP TO 8,000 RPM
NANO CNC SYSTEM
ULTRA PRECISE 32,000,000 PULSES/REV ENCODERS
1.5 G ACCELERATION
COOLANT SYSTEM – 200 LITER
MACHINE ELECTRICS: 200V-50/60HZ, 3PH, 11KVA
MACHINE HOURS (AS OF 7/7/2022, SEE PHOTO):
– POWER ON: 10,574 HOURS
– RUN TIME: 1,810 HOURS
– CUTTING TIME: 1,164 HOURS
TOTAL PURCHASE PRICE OF ABOVE EQUIPPED SYSTEM: $530,000