Haas DS-30Y with or without Universal Robot – 2019

Haas DS-30Y (**with or without Robot System) Multi-Axis CNC Turning Center
Specifications (subject to buyer verification):
Swing Diameter
Over Front Apron 31.8 in
Over Cross Slide 20.8 in
Over Second Spindle 21.8 in
Max Cutting Diameter (varies with turret) 18.0 in
Max Cutting Length (varies with workholding) 23.0 in
Bar Capacity 3.00 in
X Axis Travel 12.5 in
Z Axis Travel 23.0 in
Y-Axis Travel +/- 2.00”
Rapids on X 472 ipm
Rapids on Y 472 ipm
Rapids on Z 945 ipm
Main Spindle
Spindle Nose A2-6
Drive System Direct Speed, Belt Drive
Max Rating 30.0 hp
Max Speed 4500 rpm
Max Torque 275 ft-lbf @ 600 rpm
Spindle Bore  3.50 in
Main Spindle C Axis
Max Rating 5.0 hp
Positioning (±) 0.01 °
Secondary Spindle
Spindle Nose A2-5
Drive System Direct Speed, Belt Drive
Max Rating 20.0 hp
Max Speed 4800 rpm
Max Torque 110 ft-lbf @ 700 rpm
Spindle Bore ø 2.00 in
Bar Capacity 2.00 in
Secondary Spindle Positioning
Control Type Positioning Only
Number of Tools 24-Station
OD vs ID Tools Any Combination (will vary with turret)
Live Tooling
Max Speed 6000 rpm
Tooling BMT65
Bar Capacities
Bar Diameter Range 0.375″ to 3.125″
Bar Length Capacity 48″
Recommended Max Bar Length in Spindle  48″
Minimum Bar Length 10″
Charging Tray
Max Number of Bars to Load Up to a 30″ (762 mm) width when staged in charging tray; any
combination of bar diameters
Max Weight of Total Bars 650 lb
Max Bar weight Capacity
Lift Arm Max Weight Limit 80 lb
Maximum Thrust Push Limit 100 lb
Power Requirements Connects directly to the Haas Electrical Cabinet
Machine Weight 900 lb
Equipped With  (subject to buyer verification):
Haas CNC Control
6K RPM live tooling option
Main and sub air blast
300PSI coolant pump
Mist collector
Parts catcher
BMT65 Turret
1 radial live tool (Eppinger)
3 axial live tool (Eppinger)
Standard Inch Sub spindle tooling kit
10” main/8” sub
**For Extra Cost – Either with Machine or Robot Separately (Talk to Salesman for Pricing):
Robot info:
AWR Load and Go RC1