Hyundai-Wia L3000SY Multi-Axis CNC Turning Center
Specifications (subject to buyer verification):
CAPACITY:
Swing over bed Ø31.5″ (Ø800mm)
Swing over carriage Ø26.4″ (Ø670mm)
Max. turning diameter Ø16.5″ (Ø420mm)
Max. turning length 29.9″ (760mm)
Bar Capacity (Main/ Sub) Ø4″ / Ø2″ (Ø102 / (Ø51mm)
MAIN SPINDLE:
Spindle bore Ø4.5″ (Ø115mm)
Spindle speed 3,000 rpm [2,800 rpm_Belt]
Spindle nose A2-11 [A2-11]
A.C. Spindle Motor (S2 30min) 50 HP (37 kW) [35 HP (26 kW)_Belt]
Max. spindle torque (S2 30min) 930.8 lbf.ft (1,262 N.m) [930.8 lbf.ft (1,262 N.m)_Belt]
SUB SPINDLE:
Chuck size 6″ [6″_Belt] [8″_Built-in]
Spindle bore Ø2.4″ (Ø62mm) [Ø00” (Ø00mm)_8″]
Spindle speed 6,000 rpm [4,500 rpm_Belt] [4,500 rpm_8″]
Spindle nose A2-5 [A2-5_Belt] [A2-6_8″]
A.C. Spindle Motor (30 min. rating) 20.1 HP (15 kW) [15 HP (11 kW)_Belt]
Maximum spindle torque (30 min. rating) 99.6 lbf.ft (135 N.m) [91.5 lbf.ft (124 N.m)_Belt]
[165.2 lbf.ft (224 N.m)_8″]
TRAVEL:
X / Y axis travel 10.4″ / 4.7″ (265 / 120mm)
Z / ZB axis travel 32.7″ / 32.7″ (830 / 830mm)
X / Y axis rapid traverse rate 1,181 / 394IPM (30 / 10m/min)
Z / ZB axis rapid traverse rate 1,181 / 1,181 IPM (30 / 30m/min)
X / Y axis ball screw diameter Ø1.26″ / Ø1.26″ (Ø32 / Ø32mm)
Z / ZB axis ball screw diameter Ø1.57″ / Ø1.57″ (Ø40 / Ø40mm)
X / Y axis guideway span 12.6″ / 12.6″ (320 / 320mm)
Z / ZB axis guideway span 17.3″ / 15.3″ (440 / 390mm)
TURRET (BMT65):
Number of tools 12
Turning tool shank size □1″ (□25mm)
Boring bar diameter Ø2″ (Ø 50mm)
Turret index time (1 step) 0.15 sec
Turret clamping force 13,576 lbf (6,158 kgf)
COOLANT and HYDRAULIC SYSTEM:
Coolant tank capacity 76.6 gal (290 liter)
Hydraulic tank capacity and required oil 53.7 gal (14 liter) / VG32 or CB32
Lubrication tank capacity and required oil 0.8 gal (3 liter) / G68
GENERAL:
Machine Height 76.8″ (1,950 mm)
Floor Space (L) with coolant tank 179.1″ (4,549 mm)
Floor Space (W) 74.4″ (1,890 mm)
Machine weight 15,212 lbs (6,900kg)
Power required 68 kVA / 179 amp @ 220V
Voltage Required 205 – 235 Volts / 3 Phase
Equipped With (subject to buyer verification):
Hyundai Wia Fanuc i series – Smart Plus control
Max. 3,000 rpm(Main) and 6,000 rpm(Sub) built-in spindle
Powerful 50 HP (37 kW) main / 20 HP (15 kW) sub spindle motor
Fast 1,181 IPM (30m/min) X, Z and ZB / 394 IPM (10m/min) Y axis rapid traverse
Auto Tool Setter
Parts catcher (Sub)
Pneumatic part ejector in sub spindle
12 Station Turret
Right Side Hinge Type Chip Conveyor (38” discharge height)
3 color tower signal
LNS bar feeder interface
Double Pre-Tensioned Ball screws