Mazak Hyper Quadrex 200MSY – 2013

Mazak Hyper Quadrex 200MSY CNC Turning Center with Milling
Specifications (subject to buyer verification):
Maximum Swing Over Upper Turret……… 14.56″
Maximum Swing Over Lower Turret……… 12.598″
Maximum Machining Diameter: Chucking…. 13.54″(Upper)
Maximum Machining Diameter: Chucking…. 8.26″(Lower)
Maximum Distance Between Chuck Jaws….. 33.875″

MAIN SPINDLE SPECIFICATIONS (L):
Preparation ONLY for BB08 8″ 3-Jaw or Collet Chuck
Spindle Nose………………………. A2-6
Spindle Bore………………………. 2.99″
Maximum Bar Work…. ………………. 2.56″
NOTE: Maximum bar work and maximum spindle speed
depends upon optional chuck package.
Spindle Speed……………………… 35-5,000 RPM
Spindle Index (Programmable)………… 0.0001 Deg.
3,600,000 Positions
Spindle Horsepower (Cont./30 Min.)…… 20/30 HP (AC)
Spindle Torque (25% ED)…………….. 344.4 ft-lbs.

SECOND SPINDLE SPECIFICATIONS (R)
8″ BB08 Chuck Package with Y1225 Non-thru cylinder
Spindle Nose………………………. A2-6
Spindle Bore………………………. 2.99″
Spindle Speed……………………… 35-5,000 RPM
Spindle Index (Programmable)………… 0.0001 Deg.
3,600,000 Positions
Spindle Horsepower (Cont./30 Min.)…… 20/30 HP (AC)
Spindle Torque (25% ED)…………….. 344.4 ft-lbs.

 

GENERAL SPECIFICATIONS:
Floor Space (WxL)………………….. 137.8″ x 103″
Machine Height…………………….. 97.8″
Total Power Required (Machine Only)….. 61.4 KVA
NOTE: Actual Machine Main Transformer
KVA Rating Will be Greater.
Air Requirements…………………… 72.5PSI/8.8CFM
Machine Weight…………………….. 26,235 lbs.

Equiped With (subject to buyer verification):
Mazatrol Matrix 2 Control
8” Kitagawa BB08 Chucks on Both Spindles
Chip Conveyor