Mazak Integrex 200-4ST with Gantry – 2010

Mazak Integrex 2004ST with GL150F Gantry Robot
CNC Turning / Milling Center with Sub-Spindle & Y-Axis & Sub-Turret

Specifications (subject to buyer verification):
Maximum Swing……………………………………. 26″
Maximum Swing Using Y-Axis…………………… 19.5″ – 26″
NOTE: Limited to 12.99″ when lower turret is in operating range without tools mounted.
Maximum Swing over Lower Turret…………….. 10.6″
NOTE: Without tools or holders on lower turret.
Maximum Cutting Diameter: Chucking…………. 26″ (Upper)
Maximum Cutting Diameter: Chucking…………. 10.24″ (Lower)
NOTE: Without boring bar holder mounted.
Maximum Cutting Length:
60″……………………………………………….. 58.85″
Maximum Distance Between Chuck Jaws:
60″………………………………………………… 60.83″
MAIN SPINDLE SPECIFICATIONS (L):
Spindle Nose……………………………………….. A2-6
Spindle Bore……………………………………….. 2.99″
Maximum Bar Work…. …………………………… 2″
Spindle Speed……………………………………… 35 – 5000 RPM
Spindle Index (Programmable)………………….. 0.0001 Degree
Spindle Horsepower (Cont./30 Mins.)………….. 20/30 H.P. (A.C.)
Spindle Torque (25% ED)………………………… 344.2 ft-lbs

SECOND SPINDLE SPECIFICATIONS (R)
Spindle Nose………………………………………… A2-6
Spindle Bore…………………………………………. 2.99″
Maximum Bar Work………………………………… 2″x 34.6″ deep from chuck face (2″ thru optional)
Spindle Speed………………………………………. 35 – 5000 RPM
**Spindle Index (Programmable)…………………… 0.0001 Deg. C-Axis Optional **Must be verified
Spindle Horsepower (Cont./30 Min.)……………. 20/25 HP (A.C.)
Spindle Torque (30 Min.)………………………….. 241 ft-lbs

ATC Tool Shank…………………………………….. KM63
Rotary Tool Spindle Speed……………………….. 12,000 RP
Rotary Tool Spindle Horsepower (20% ED)……. 25 H.P. (A.C.)

AXIS TRAVELS:
B-Axis……………………………………………….. 225 degrees (0.0001 degree increments)
Y-Axis………………………………………………. +/- 3.15″
X-Axis………………………………………………. 22.83″
Z-Axis:
60″……………………………………………… 60.82″

Equipped With (subject to buyer verification):
Mazatrol Matrix Control
Flex-GL150F Gantry Load/Unloader
40 ATC – KM63
Lower Turret with Milling
60”cc