Mazak Integrex 200-IIIS – 2004

Mazak Integrex 2003S CNC Turning / Milling Center with Sub-Spindle & Y-Axis / Integrex 200-3S

Specifications (subject to buyer verification):
Maximum Swing……………………… 26″
Maximum Swing over Carriage…………. 19.7″ -26″
NOTE: Depends upon workpiece length,
tool magazine type and Y axis position
Maximum Cutting Diameter: Chucking…… 26″
Maximum Cutting Length……………… 40″
Maximum Distance Between
Standard Chuck Faces……………… 41.14″

MAIN SPINDLE SPECIFICATIONS (L):
Spindle Nose………………………. A2-6
Spindle Bore………………………. 2.99″
Maximum Bar Work…. ………………. 2.5″
Spindle Speed/Ranges……………….. 35 – 5000 RPM / 2
Spindle Index (Programmable)………… 0.0001 Degree
Spindle Horsepower (Cont./30 Mins.)….. 20/30 H.P. (A.C.)
Spindle Torque…………………….. 258.1 ft-lbs

SECOND SPINDLE SPECIFICATIONS (R)
Spindle Nose………………………. A2-6
Spindle Bore………………………. 2.99″
Maximum Bar Work…………………… 2″
Spindle Speed/Ranges……………….. 35 – 5000 RPM / 2
Spindle Index (Programmable)………… 0.001 Degree
Spindle Horsepower (Cont./30 min)……. 20/25 HP (A.C.)
Spindle Torque…………………….. 241 ft-lbs

TURRET AND TOOLING SPECIFICATIONS:
ATC Tool Shank…………………….. KM63
Rotary Tool Spindle Speed/Ranges…….. 12,000 RPM / 1

Equipped With (subject to buyer verification):
Mazatrol PC-Fusion-CNC 640MT Pro Control
Performance CNC Optional Pkg
PCMCIA Interface (2-Slot, Card Bus)
Network Interface (For LAN &Modem)
Y-Axis Control
Coolant Through Milling Head
71 PSI Thru Clnt/Flood Clnt Simul-Flowable
C-Axis 0.0001 Degree Incr. (1st Spindle)
2nd Spindle Position 0.001 Deg w/o C-Axis
C-Axis 0.0001 Degree Incr. (2nd Spindle)
B-Axis 0.0001 Deg. Incr. N/A Contouring
B-Axis Index 5 Degree (Coupling Clamp)
Chip Conveyor Side Disposal (Hinge Type)
Automatic Tool Eye
Auto Chuck Jaws Open/Close (1&2 Spindle)
Chuck Open/Close Confirm (1&2 Spindle)
40 KM-Tool Magazine
Auto Parts Catcher
Workpiece Conveyor for APC
Chuck Air Blast (1st spindle)
LNS Quick Load Servo 2 Barfeed
2.5” Bar Cap on Main Spindle
Collet Style Chuck on Main Spindle
Main Spindle 2.5” Bar Thru-Hole cyl. S1875
Prep for Remote Diagnostic Kit Net-Op
**ATS A6 S26TL Collet Nose for Main Spindle
**Kitagawa B208 8” Chuck on Sub Spindle with Non-Thru Hole Cyl. Y-1225

**Must be confirm if chucks are included