Mazak Integrex 400SY with Gantry (2000)

SKU: Mazak-Integrex-400SY-with-Gantry-(2000) ,

2000 Mazak Integrex 400SY with Gantry Load/Unload
CNC Turning & Machining Center
Specifications:
Maximum Swing 24.01″
Swing Over Cross Slide 24” – 13.1″
Maximum Machining Diameter 24.01”
Spindle Nose A2-8
Spindle Bore / Max. Bar Work 3.46” / 3.0”
Spindle Speed 35 – 3,000 RPM
Spindle Horsepower 40 HP
Spindle Index 0.001 Degree
Second Spindle Nose / Motor / Speed / Index A2-6 / 25HP / 35-3500 RPM / 0.001 Degree
Tool Magazine Storage 80 ATC (CAPTO)
Max. Tool Length / Weight 11.81” / 22 lbs.
Rotary Tool Spindle Speeds / Motor 15 – 6000 RPM / 20HP
Y-Axis Stroke +/-4.13”
X-Axis Stroke 22.83”
Z-Axis Stroke 43.11”
Rapid Traverse (X & Z / Y) 1181 IPM / 591 IPM
Floor Space 149” x 88” x 106”

Equipped With:
Mazatrol Fusion 640MT

EIA/ISO OPTION PACKAGE (for Integrex with B axis)
B-AXIS 0.001 DEGREE INCR. N/A CONTOURING
HYDRAULIC PRESSURE INTERLOCK
COOLANT THROUGH MILLING HEAD
TOOL EYE (AUTOMATIC)
PCMCIA INTERFACE(2-SLOT)
3.5″ FLOPPY DISK DRIVE (FDD)
2GB HARD DRIVE
**THW 315-86 QUICK JAW CHANGE CHUCK FOR THE MAIN SPINDLE
**THW 265-71 QUICK JAW CHANGE CHUCK PACKAGE FOR THE SECOND SPINDLE
80 CAPTO-TOOL MAGAZINE
MILLING-SPINDLE SYNCHRONOUS TAPPING
OVERLOAD DETECTION SYSTEM
GL300F CHUCK CELL W/SHUTTLE LOOP CONV. D3 HAND JAW ABCDE
JORGENSEN CONVEY-R-VAC
COOLANT FILTRATION SYSTEM FOR CAST IRON INCLUDING ELECTRICAL INTERFACE
FACTORY PREPARATION FOR 1000 PSI COOLANT SYSTEM THRU TURNING AND MILLING
**MAZAK DOUBLE SUPER FLOW HIGH PRESSURE COOLANT SYSTEM
(1000 PSI/6GPM MAX.POSSIBLE)
INSP PLUS EIA/ISO MEAS SYSTEM M640M (A/4012/0516) DPT3
COOLANT THROUGH SPINDLE L & R

**Per Serial but Subject to buyer verification