Mazak Vortex e1060V/8S – 2016

Mazak Vortex e-1060V/8S (Single Table) 5-Axis CNC Vertical Machining Center
Specifications (subject to buyer verification):
Capacity
Max. workpiece diameter 59.06”
Max. workpiece height 57.09”
X-axis stroke (longitudinal table movement) 66.73”
Y-axis stroke (crosswise spindle movement) 41.73”
Z-axis (vertical spindle movement) 52.56”
Distance from the center of B-Axis Rotation to the Center of Pallet
X-Axis: Zero Point 52.56”
X-Axis: Minus Stroke End 14.17”
Distance from the Spindle Nose to the Center of Pallet
X-Axis: Zero Point 40.75”
Distance from the center of B-Axis Rotation to the top surface Pallet 1.97” to 54.92”
Distance from the spindle nose to the top surface of pallet (B-axis = 0 Deg) -9.84” to 43.11”
Pallet Load (evenly loaded) 5,952 lbs
Mill Spindle
Mill Spindle Nose Type BBT No. 50
Mill Spindle Speed 25 – 10,000 RPM
No. of Mill Spindle Speed Change Ranges 2 Steps
Mill Spindle Drive Motor 30 min/continuous 50/40 HP
Feedrate
Rapid Traverse Rate 1653 IPM
Cutting Feedrate 1653 IPM
Table & Pallet
Pallet Working area 1000mm Sq. Pallet

Equipped With (subject to buyer verification):
Mazatrol Matrix 2 Control
1000MM (39.37”) sq Location Bore Tap Pallet (1PC)
120 Tool Chain Magazine (BBT)
Laser Mill Tool Measure (NC4/Full, W/O Soft
Air Blast for NC4
Scale Feedback System for X,Y-Axis
148MM Duct Only for mist collector
Hi-Press Coolant M-Thru (7MPS) w/Chiller
Pressure Switch for Thru-Coolant
Leak Circuit Breaker (N/A Power Transf.)
Signal Tower (3 Colors Lights, Square)
Additional Work Light (Halogen Light)
Chip Conveyor Side Disposal (Consep)
Auto Packing Cycle with Load Detection
Mill-spindle Synchr Tapping (w/o Tool)
EIA Dynamic Compensation 2 (included 1)
Maximum Program size: 8MB
G00 Slope Constan
Inch/Metric Conversion
Cylindrical & Polar Coordinate (EIA)
Work Setting Error Compensation
Tool Length Comp in Tool Axis Direction
IC Memory Card Operation
Compact Flash Card I/F + USB I/F (1 Port)
Stopper Block for Angle Tool Holder