Mori Seiki MT-2500SZ / 1500 – 2005

2005 Mori Seiki MT-2500SZ / 1500
Multi-Axis CNC Turning Center
Specifications (subject to buyer verification):
MAX. SWING OF WORKPIECE 35.8”
SWING OVER CROSS SLIDE 15.4” – 33.4”
MAXIMUM DISTANCE BETWEEN CENTERS 71.9”
MAXIMUM TURNING DIAMETER TURRET-1 21.2” TURRET-2 11.0”
MAXIMUM TURNING LENGTH 60.2”
BAR WORK CAPACITY HEADSTOCK-1: 2.9” / HEADSTOCK-2: 2.5”
X-AXIS TRAVEL <TOOL SPINDLE> 22.2”
Y-AXIS TRAVEL <TOOL SPINDLE> 9.1” <+/-4.5”>
Z-AXIS TRAVEL<TOOL SPINDLE> 63.0”
B-AXIS ROTATION RANGE <TOOL SPINDLE> +/- 120 Degrees
X-AXIS TRAVEL <TURRET 2> 6.1”
Z-AXIS TRAVEL <TURRET 2> 58.2”
MAXIMUM SPINDLE SPEED HEADSTOCK 1: 4,000 RPM HEADSTOCK 2: 4,500 RPM
TYPE OF SPINDLE NOSE HEADSTOCK-A2-8 / HEADSTOCK-A2-6
THRU SPINDLE HOLE DIAMETER HEADSTOCK-1 3.5” / HEADSTOCK-2 2.9”
MIN. SPINDLE INDEXING ANGLE .0001 DEGREE
TURRET 1: TOOL STORAGE CAPACITY 120 ATC
TURRET 1: B-AXIS INDEXING TIME 2 SEC. @ 90 DEG
TURRET 1:B-AXIS MIN. INDEX ANGLE .001 DEG
TURRET 1: MAX TOOL SPINDLE SPEED 8000 RPM
TURRET 1: MAX TOOL Diameter 3.5” / 4.9”
TURRET 1: MAX TOOL LENGTH 15.7”
TURRET 1: MAX TOOL MASS 17.6 LBS
TURRET 1: TOOL CHANGING TIME TtoT 1.6 SEC
TURRET 2: NO. OF STATIONS 12
TURRET 2:MAX ROTARY TOOL SPINDLE SP 4000 RPM
RAPID TRAVERSE RATE <TOOL SPINDLE> X: 944 IPM / Y: 629 IPM / Z: 944 IPM / B: 27 IPM / C: 400 IPM
RAPID TRAVERSE RATE <TURRET 2> X: 787 IPM / Z: 944 IPM
SPINDLE DRIVE MOTOR <30 MIN/CONT.> HEADSTOCK 1: 24.7 HP/20HP / HEADSTOCK 2: 20HP/15HP
TOOL SPINDLE DRIVE MOTOR 10 MIN: 24.7 HP / 30MIN: 20HP / CONT: 15HP
TURRET 2 ROTARY TOOL SPINDLE DRIVE MOTOR 3 MIN: 10HP / CONT: 2 HP
FLOOR SPACE 202” X 125” X 104”
WEIGHT 31,900 LBS

Equipped With (subject to buyer verification):
MORI SEIKI MSX-501T MAPPS II CNC CONTROL
120 ATC C-6 Tools
Sub Spindle
Sub Turret with Milling
CHIP CONVEYOR
High Pressure Coolant Unit
(2) 10” Forkardt Quick Jaw Change Chucks