2010 MORI SEIKI NT 1000WZ CNC MULTI TASKING CENTER
Specs
Maximum Swing Of Work Piece 14.5″
Swing Over Cross Slide 14.5”, Turret 2 11.8”
Maximun Turning Length 16.6”
X – Axis Travel 15″
Y – Axis Travel + / – 4.1”
Z – Axis Travel 18.1″ + 6.1″
X – Axis Travel TRT 2 6.1″
Z – Axis Travel TRT 2 24″
C – Axis Travel Main / Sub .0001 Deg.
B – Axis Min. Index Angle / Index Range -120 – +120 DEGREE
B – Axis Spindle Speed HSC 20,000 RPM
Horse Power For Tool Spindle 12 HP
Number Of Tool For Tool Spindle 38 ATC
Spindle Nose No 1, No 2 A2-5 / G6 Flat Nose
Hole Through Spindle No 1, No 2 2.4” / 2.2”
Bar Work Capacity No. 1, No 2 2.0″/1.5”
Main Spindle Motor 15 HP
Sub Spindle Motor 10 HP
Spindle Speeds No 1, No 2 6000 / 1000 RPM
Rapid Traverse Rate X, Y, Z, A 945, 945, 629, 300 IPM
Turret Configuration 10
Turret Indexing Time .26 Sec.
Machine Weight 19,690 LBS.
Equipped with
1ST SPINDLE ORIENTATION 1ST SPINDLE OUTPUT SWITCHING FUNCTION
3D INTERFERENCE CHECK WITH OPEN CNC FUNCTION 3RD / 4TH REFERENCE RETURN
99 TOOL OFFSETS A1 CONTOUR CONTROL II FUNCTION AXIS COMPENSATION
AIR BLOW FOR SPINDLE 1 AIR BLOW FOR TOOL TIP SPINDLE
AUTO POWER OFF AUTOMATIC DATA BACKUP
BALANCED CUTTING BELL – SHAPED ACC. / DEC. AFTER CUTTING FEED
CONTROLLABLE AXIS COMPENSATION, CONTROL AXIS NUMBER, SIMULTANEOUS AXIS EXPANSION CS – AXIS CONTOUR CONTROL
CUSTOM MACRO B DIAMETER / RADIUS DYNAMIC SWITCHING INTERPOLATION TYPE
EMBEDDED ETHERNET AND FAST ETHERNET SOFTWARE FAST DATA SERVER
HIGH PRESSURE COOLANT CHIP BLASTER SYSTEM HIGH SPEED SKIP, SERIAL SPINDLE INTERFACE
HIGH SPEED TOOL SPINDLE 20,000 RPM HSSB INTERFACE BOARD
IN MACHINE WORK PIECE MEASURING SYSTEM OPTICAL TOUCH SENSOR RENISHAW OMP 60 INCH/METRIC CONVERSION
Main Spindle KITAGAWA 6″ HOLLOW CHUCK PACKAGE LNS QUICKLOAD 80 SERVO S2 SHORT MAGAZINE BARFEED SYSTEMS
MAPPS PROGRAMMING MORI MSX 711IV CNC CONTROL
MULTIPLE REPETITIVE CYCLES MULTIPLE SPINDLE CONTROL, EXTENDED SPINDLE ORIENTATION, EXTENDED SPINDLE OUTPUT
NANO SMOOTHING FOR 5 AXIS MACHINING OPTIMUM TORQUE ACC / DCC
PITCH ERROR COMPENSATION, EXTERNAL DECELERATION POLAR COORDINATE, CYLINDRICAL, HELICAL INTERPOLATION
POLE POSITION DETECTION FUNCTION PROGRAM STORAGE 640M / 500 REGISTERED PROGRAMS
RIGID TAPPING SIDE EXIT CHIP CONVEYOR
SMOOTH TCP STRAIGHTNESS COMPENSATION
THREAD CUTTING RETRACT THREE DIMENSIONAL COORDINATE CONVERSION
TOOL CENTER POINT CONTROL TOOL OFFSET FOR MILLING AND TURNING FUNCTION
TOOL RADIUS COMPENSATION FOR 5 AXIS MACHINING TOOL SETTER
TOOL SPINDLE THROUGH COOLANT SYSTEM UNEXPECTED DISTURBANCE DETECTION FUNCTION
Y – AXIS OFFSET Parts Ejector System
Approx 50 Capto C5 Tools
5” Chuck Sub Spindle All Available Lower Turret Tools
