Tarus TPTCGD508SB CNC Gun Drill – 2017

Tarus TPTCGD508SB CNC Gun Drill

Specificaitons:
—————
Droke Stroke (W-Axis), No Whip Guides: 93″
Drill Stroke with (3) Whip Guides: 81.4″
X-Axis Travel (Table): 114″
Y-Axis Travel (Vertical): 60″
Z-Axis Travel (Column In/Out): 46″
Work Table Size: 60″ x 96″
T-Slots in Main Table (with Gutter for Draining): 7/8″
Table Capacity: 60,000 Lbs

Coolant System:
—————
Coolant Pressure (Maxi Mum): 1,500 PSI
Coolant Pressure Pump Power: 20 HP Each
(2 Pumps total, data for a single pump): 0 – 40 G.P.M.
Coolant Volume (Servo Controlled): 0 – 40 GPM Coolant Reservoir (Clean
Tank): 700 Gallons Coolant Reservoir (Discharge Tank): 250 Gallons Coolant Recirculation Pump 5 HB: 75 GPM

Drilling: Capacity:
—————
Max Gun Drilling (No Pilot): 2″ Diameter BTA/STS Drilling Diameter (No
Pilot): 7.5″
BTS/STS with Pilot Hole: 2.22″

Main Spindle:
—————
Spindle Power (40% Duty Cycle S6): 33.25 HP Spinde Power (100% Duty Cycle
51): 22.79 HP Spindle Speed Range: 0 – 3394 RPM Spindle Maximum Torque: 0 –
272 Ft-Lbs

Drill Slide:
—————
Drilling Feed Force: 7,723 Lbs
Drill Depth (3 Whip Guides): 87.45″
Drill Slide Travel (No Whip Guides): 93.45″

Auxiliary Spindle:
—————
Spindle Power (40% Duty Cycle): 33.25 HP
Power: 22.7 HP
Speed Range: 0 – 3500 RPM
Max Torque: 13 Ft-Lbs
Stroke (In & Out): 10″
ANSI B 5.50 – 78, ISO 7388 12:
Tool Type: B
Taper: CAT 50

Filtration System:

Large Dual Inline Bag Flters
25 Micron then 19 Micron Filtration System

Auxiliary Spindle:

Milling, Thread Milling, Tapping, Counter Boring and Spot Facing

Equipped With:

BTS / STS Drills Capable of 2.5″ Diameter Drilling Chip Conveyor Coolant Tank Circular Interpolation

Comments:

Dual Spindles Are Side By Side, Spaced 12.5″ Center To Center Reducing Effective Travel To 101.5 (2578 Mm)