Toshiba TUE-150(S) CNC VTL with Milling – 2017

Toshiba TUE150(S) CNC VTL with Milling
Specifications (subject to buyer verification):
MAIN CAPACITY
Table diameter 57.09″
Maximum swing 78.74″
Maximum height from table top to ram bottom 67.72″
Maximum cutting height 61.02″
Maximum cutting diameter 78.74″
Maximum cutting force of ram 5,508 lbf
Maximum load on table 17,600lbs

TRAVEL
Horizontal travel of rail head (X-axis) -3.94 ~ 45.2″
Vertical travel of ram (Z-axis) 35.43″
Vertical travel of crossrail (Not NC-axis) 39.37″

TABLE
Table speed Low; 2 ~ 100 min-1
High; 8 ~ 400 min-1
Number of table speed ranges 2 steps (Gear shift)
Maximum table torque 15,435 lbf-ft at 20min-1

FEED RATE
Rapid traverse rate of Rail-head (X-axis) 590.55 ipm
Rapid traverse rate of crossrail (Z-axis) 472.44 ipm
Feedrate X & Z-axes 0.04 ~ 78.74 ipm
Vertical travel speed of crossrail at 60Hz (Not NC axis) 9.84 ipm

RAM
Type Automatic tool clamp
Guideway Dual parallel
Section of ram 9.84 x 9.06″

TOOL HOLDERS
Bit shank size (maximum) 1.26 x 1.26″
Clamp force of tool 8,833 lbs
Type of holder shank 7/24 taper JIS 50T & Dia.140mm (5.51″) flange

LIVE SPINDLE
Rotation speed 15 ~ 3,000min-1
Maximum torque (5min. Rating) 171.8 lbf.ft
Rapid traverse rate of rotary axis (C axis) 720 degree/min
Feedrate (C axis) 360 degree/min

MOTORS
Table drive motor (30min/continuous rating) 60/50HP
Feed servo motor X-axis AC 5.4HP
Z-axis AC 5.4HP
MACHINE MAIN SPECIFICATIONS
MACHINE SIZE
Height 17.72 ft
Floor space 16. 73 x 12.30 ft
Machine weight 37,480 lbs

Equipped With (subject to buyer verification):
Fanuc Series Oi-0TD
Chip Guard
Chip Conveyer
12 Tool ATC
Automatic slideway lubricating unit
Crossrail elevating device
Splash cover – Height between table-top to cover top: 69.9″ (1,775mm)
Ram slideway (Z-axis) lubrication unit