Tsugami BU-26SY Gang-Turret CNC Swiss Lathe – 2006

YouTube video

Tsugami BU26SY Gang-Turret CNC Swiss Lathe
2006
Specifications (subject to buyer verification):
Main Spindle
Bar Capacity: 1.000″
Turning Lengths: 9.842 ” per Stroke
Indexing Increments: Full C-Axis (.001 deg)
Speeds: 6000 RPM

Sub-Spindle
Bar Capacity: 1.000 ”
Speed: 200 – 5000
Drive Motor: 7.3 hp
Index Increment (Degrees): Full C-Axis (.001 Deg)
Axis Specifications
STD. Number of Axes: 8
Axis/ Travel/ Traverse rate/ Feed rate
X1 (STD.) 1.378 Inch 472 IPM 236 IPM
Z1 (STD.) 9.842 Inch 944 IPM 236 IPM
C1 (STD.) 360.000 Deg.
Y1 (STD.) 9.448 472 IPM 236 IPM
X2 (STD.) 4.330 Inch 472 IPM 236 IPM
Z2 (STD.) 5.511 Inch 944 IPM 236 IPM
Y2 (STD.) 3.149 Inch 393 IPM 236 IPM
Z3 (OPT.) 11.220 Inch 944 IPM 236 IPM

Live Tool Speed: 5000 RPM
Live Tool Motor: (HP): 15.0

Type/ Gang-Slide/ Turret
-Max. number of tools
Turning 7 8
Rotary 2 4
Square 0.500 ”
Round 0.750 ” 1.000 ”
Rotary 0.250 ” 0.500 ”
Rotary tooling
Horse power .7 1.9
Speed 8000 rpm 5400 rpm
There are a number of tools offered that allow for 2 – 4 tools on one holder

On-Center Mill Drill Standard with ‘C’ Axis
Off-Center Mill Drill Standard with ‘Y’ Axis

Floor layout: Length: 137 ” x Width: 80 ” x Height: 69 ”

Machine: 133″ x 83″ x 101″ 12,100 lbs
Coolant/Chip Pan: 80″ x 62″ x 23″ 250 lbs

Equipped With (subject to buyer verification):
Fanuc Series 18iTB CNC Control
Parts Catcher Unit with Exit Conveyor
Chip Conveyor
FMB Turbo 3-38 Magazine Type Bar Loader

* An 8-station turret (3-axis), plus an independent gang tool slide with
driven tools permits many simultaneous functions. Balanced turning, balanced
threading, simultaneous front and back working.
* Standard are a 15hp main spindle, 7.5hp sub-spindle with through feed
capability, 8-axis including x1,x2,z1,z2,z3, and y.