Doosan Puma TT1800SY
Multi-Axis CNC Turning/Milling Center
Specifications (subject to buyer verification):
CAPACITY:
Swing over bed 230 mm (9.05″)
Swing over carriage 230 mm (9.05″)
Maximum turning diameter (upper turret) 230 mm (9.05″)
Maximum turning diameter (lower turret) 230 mm (9.05″)
Distance between left and right spindle nose 978 mm (38.5″)
LEFT AND RIGHT SPINDLES:
Maximum bar capacity 67 mm (2.625″)
Recommended chuck size 210 mm (8″)
Max permissible weight for chuck work (including chuck) 120kg (264 lb)
Spindle speed 50-5,000 rpm
Spindle nose A2-6
Left spindle draw tube ID 68 mm (2.68″)
Right spindle draw tube ID 65 mm (2.559″)
Spindle bore diameter 76 mm (2.99″)
AC spindle motor (30 min. rating) 22 kW (30 hp)
Maximum spindle torque (40% ED) 208 Nm (153 ft-lb)
LEFT AND RIGHT SPINDLE C-AXIS:
Minimum programmable angle 0.001 degree
Rapid traverse rate (RPM) 600 rpm
C-axis repeatability ±0.006 degree
C-axis positioning accuracy 0.0083 degree
C-axis braking torque 579 Nm (427 ft-lb)
Y-AXIS:
Y-axis travel (total) 100 mm (±50mm) (3.93″ (±1.96”))
Y-axis travel (above center) 50 mm (1.96″)
Y-axis travel (below center) 50 mm (1.96″)
Y-axis rapid traverse rate 7.5 m/min (295 ipm)
Y-axis repeatability ±0.003 mm (±0.00012″)
Y-axis feed thrust (continuous) 8,180 N (1,839 lb)
Y-axis feed thrust (intermittent) 13,087 N (2,942 lb)
BED, SADDLE & CROSS SLIDE:
Angle of slant bed 45 degree
X1 axis travel 165 mm (6.5″)
Z1 axis travel 700 mm (27.5″)
X2 axis travel 190 mm (7.48″)
Z2 axis travel 720 mm (28.34″)
Equipped With (subject to buyer verification):
Fanuc Series 31i-Model B
Chip Conveyor
8” Chuck