EDMMax 434W Fast Wire EDM (New)
Machine Tool
Travels
X:15.7”(400mm)
Y:12.6”(320mm)
Z:16.14” (410mm) máximum clearance
U:1.2” (30mm)
V:1.2”(30mm)
Work table size 18.1 x 29.1” (460 x 740mm)
Maximum workpiece dimensions 15.7 x 12.6 x 16.14” (400 x 320 x 410mm)
Maximum workpiece weight 880 lbs. (400 kg)
Drive system X & Y: Direct drive Panasonic AC servo motors
U & V: Stepper motors
Minimum resolution 0.00004” (.001mm)
Wire diameter .007” (.18mm)
Rated cutting speed 10-12 in²//hr. in 1” thick tool steel
Outside dimensions 70 x 49 x 85″ (1700 x 1250 x 2150mm)
Weight 3,630 lbs. (1,650 kg)
Dielectric System
Capacity 39.5 gallons (150 Liters)
Filter elements Paper (2)
Dimensions 32 x 40 x 20” (812 x 1000 x 508mm)
CNC X8 Control
Best surface finish 1.0µm
Circuit system Power MOS Transistor
Maximum current output 12 amps
Data input On-board programming, LAN port and USB
Display 15” color monitor
Controllable axes-simultaneous 4 (X, Y, U, V)
Z-axis is motor driven Manual
Cutting conditions Built-in on-board cutting conditions
Input power 220/3/60 – 5kva
Dimensions 24 x 29 x 75” (410 x 650 x 1900mm)
On-board CAD System
• Ultra-high precision ballscrews and Hiwin® Linear Guideways
• Truss type U V Axis design for taper cutting, stepper motor drives
• Direct drive Panasonic AC servo motors on the X and Y axes with rotary encoder feedback.
• Power Z-axis – manual
• Flush cutting
• Solid round wire guides, not split guides
• Remote pendant control- jog, center and edge find.
• Auto lube system
• Work light
• On-board CAD Programming System
• DXF loading via USB port and LAN port.
• Industrial PC with LCD color display
• Touch screen for technology input
• Extremely user friendly
• Auto cutting condition and cutter comp selection with 3-Pass Technology built-in
• Fast cutting– 10-12 in²/hr. in solid cutting
• On-board help screen
• LAN port, USB port – DXF files are easily imported.
• Positioning accuracy .005mm (.0002”)
• Dielectric flush cart with two (2) paper filters
• Incremental and Absolute data input
• 2D and 3D graphic simulation of wire path
• Error messages
• Simultaneous control of X Y U and V axes
• Mirror and rotation of program
• Automatic center and edge finding
• Resumption of cutting after power failure
The EDMMax 434W Fast Wire EDM is an affordable solution to the entry level wire EDM market and 3D Additive part separation from the build plate. Unlike traditional brass wire EDMs, the reusable molybdenum wire automatically reverses its direction at the end of the spooling cycle; at which time, the program feed rate briefly pauses and then ramps up as the wire feeds in the opposite direction.
Unlike traditional brass wire EDMs, the Fast Wire EDMs are NOT FLUSH DEPENDENT! By this we mean that these Fast Wire EDMs will cut equally well in both good and bad flushing conditions! The dielectric is deionized water with an additive that allows the water to adhere to the moly wire so that when the wire goes through the very narrow kerf (about .008” wide), it pulls the swarf (chips) through the kerf without relying on high flush pressure or submerged cutting. It is almost impossible to break the high tensile strength moly wire!