Genturn SL42Y2 Hybrid 8-Axis CNC Swiss Machine
Specifications (subject to buyer verification):
Main Spindle
Maximum RPM: 6,000 RPM
Main Spindle Servo Motor: 10-Horsepower 15-minute Duty-Rated (7.5-HP Constant Duty-Rated)
Collet Style for Main & Subspindle: Traub-42 / 173E
Collet Closer Style: Lever Action Collet Closer – Driven by Hydraulic Accusation
Bar Diameter (with or without Guide-Bushing) : 1/4” – 1-5/8” (Ø5-42mm) without Guide-Bushing
Maximum Turning Length (Rotary Bushing) : 12.20” Single Stroke (310mm) (Rotary Guide-Bushing Optional)
Maximum Turning Length (without Bushing) : 4.13” (105mm)
Spindle Bore: 1.732” (Ø44mm)
Main Spindle Tooling
O.D. Turning Tool Holders – S1: 6 – 16mm (5/8”) Square Shank Tool Holders
I.D. Internal Tool Holders S1: 5 – 25mm Shank Round Tool Sleeve Bores
I.D. Deep Hole Drill Positions – S1: 2 – 25mm Shank Round Tool Sleeve Bores
Cross Slide Live Tools – S1: 6 – ER-20 Collet Chuck Spindles, 4,000 rpm, 2-HP (1.6kw)
Axial Front Slide Live Tool Option – S1: 3 – ER-20 Front Axial Live Tools – Optional in lieu of 1 Cross Tool
Maximum Drilling / Tapping Capacity: 13mm Drilling / M10 Tapping
Sub Spindle
Sub-Spindle RPM/Spindle Bearing: 6,000 RPM / 4-Bearing – Quad-Duplex Pair Configuration
Main Spindle Servo Moto (2.2/3.7Kw) : 10-Horsepower 15-minute Duty-Rated (7.5-HP Constant Duty-Rated)
Collet Style for Main & Subspindle: Traub-42 / 173E
Maximum Barstock Diameter: 1-5/8” (42mm) (42mm Parts can Through the Subspindle)
Spindle Bore: 1.732” (Ø44mm) (uses Hydraulic Piston Lever Action Collet Closer)
Finished Parts Ejector & Air Blast: Included
Maximum Workpiece Length for Front Ejection: 110mm Maximum Part Length for Front Ejection from Subspindle
Sub Spindle Tooling
O.D. Turning Tool Holders – S2: 3 – 16mm Square Shank Turning Tool Holders
I.D. Internal Tool Holders – S2: 5 – 25mm Shank Round Tool Sleeve Bores
I.D. Internal Tool Holders – S2: (8 possible) 3 – ER-16 Fixed Tools – Ø3/8” Max.
Subspindle Axial Live Tools – S2: (8 possible) 3 – ER-16 Axial Live Tools, 4,000 rpm, 1.0 HP (0.75kw)
Maximum Drilling / Tapping Capacity: 13mm Drilling Capacity / M10 Taping on Sub-Spindle
Maximum Cross Drilling / Tapping Capacity: 8mm Drilling Capacity / M6 Tapping
Axis
Main Spindle Stroke: 12.20” (310mm)
X1, Y1, Z1, X2, Y2, Z2 Rapid Traverse Rate: 944 IPM (24m/minute
X1, Z1 Axis Motor Power: 2-Horsepower (1.4kw)
X2, Y1, Y2, Z2 Axis Motor Power: 1-Horsepower (.75kw)
Specifications
Machine Dimensions (L x W x H) : 121” x 67” x 83” (2925x1690x2100) +29” for conveyor)
Machine Weight: 11,024 lbs. (5000kgs)
Machine Power Requirements: 220vac ±5%, 80-amps, 30kva, 3-phase, 60Hz
Air Requirements: 85-PSI at 6-CFM for Parts Catcher, Parts Ejector, & Air Blast
Equipped With (subject to buyer verification):
Mitsubishi M-830 Control
Simultaneous Main & Sub-Spindle Machining
Double “Y” Axis and Double “C” Axis
Edge Patriot 551 12’ Automatic Barfeed
Mistbuster 850 Mist Filtration System
MP Systems 4-Port 1,000 PSI High Pressure system
Rotary Guide Bushing, STN38
Chip Conveyor and Chip Cart
Parts Catcher with Exit Conveyor
Installed New in 2024 / Mfg 2023