Haas DT-2 – 2016

HAAS DT2 CNC Drill & Tap

SPECIFICATIONS:
TRAVELS S.A.E METRIC
X Axis 28.0 in 711 mm
Y Axis 16.0 in 406 mm
Z Axis 15.5 in 394 mm
Spindle Nose to Table (~ max) 21.5 in 546 mm
Spindle Nose to Table (~ min) 6.0 in 152 mm
SPINDLE S.A.E METRIC
Max Rating 15.0 hp 11.2 kW
Max Speed 10000 rpm 10000 rpm
Max Torque 46.0 ft-lbf @ 1700 rpm 62.0 Nm @ 1700 rpm
Drive System Inline Direct-Drive Inline Direct-Drive
Taper BT30 BT30
Bearing Lubrication Air / Oil Injection Air / Oil Injection
Cooling Air Cooled Air Cooled
TABLE S.A.E METRIC
Length 34.0 in 864 mm
Width 15.0 in 381 mm
T-Slot Width 0.626 in to 0.630 in 15.90 mm to 16.00 mm
T-Slot Center Distance 4.92 in 125 mm
Number of Std T-Slots 3 3
Max Weight on Table (evenly distributed) 250 lb 113 kg
FEEDRATES S.A.E METRIC
Max Cutting 1200 ipm 30.5 m/min
Rapids on X 2400 ipm 61.0 m/min
Rapids on Y 2400 ipm 61.0 m/min
Rapids on Z 2400 ipm 61.0 m/min
AXIS MOTORS S.A.E METRIC
Max Thrust X 2550 lbf 11343 N
Max Thrust Y 2550 lbf 11343 N
Max Thrust Z 4200 lbf 18683 N
TOOL CHANGER S.A.E METRIC
Type SMTC SMTC
Capacity 20+1 20+1
Max Tool Diameter (full) 2.0 in 51 mm
Max Tool Length (from gage line) 7 in 178 mm
Chip-to-Chip (avg) 1.6 s 1.6 s
TAPPING S.A.E METRIC
Max Tapping Speed 5000 rpm 5000 rpm
GENERAL S.A.E METRIC
Coolant Capacity 55 gal 208 L
AIR REQUIREMENTS S.A.E METRIC
Air Required 4 scfm @ 100 psi 113 L/min @ 6.9 bar
Inline Air Hose 3/8 in 3/8 in
Coupler (Air) 3/8 in 3/8 in
Air Pressure Min 80 psi 5.5 bar
DIMENSIONS – SHIPPING S.A.E METRIC
Domestic Pallet 100 in x 91 in x 99 in 254 cm x 231 cm x 251 cm
Export Pallet 100 in x 91 in x 99 in 254 cm x 231 cm x 251 cm
Weight 5350 lb 2427.0 kg

EQUIPPED WITH:
HAAS CNC CONTROL
20 POSITION TOOL CHANGER
15,000 RPM SPINDLE
COOLANT SYSTEM
4TH AXIS ROTARY TABLE,
PROBE
PCOOL,
REMOTE JOG HANDLE,
HIGH SPEED MACHINING
RIGID TAP,
ETHERNET
CHIP AUGER
REPLACEMENT COST $96,000