Mazak Integrex 2004S CNC Turning / Milling Center with Sub-Spindle & Y-Axis
Specifications (subject to buyer verification):
Maximum Swing……………………… 26″
NOTE: Tool eye body may limit max. swing.
Maximum Swing over Carriage…………. 19.5″ -26″
NOTE: Depends upon workpiece length,
tool magazine type and Y axis position
Maximum Cutting Diameter: Chucking…… 26″
Maximum Cutting Length……………… 40″
Maximum Distance Between
Standard Chuck Faces……………… 41.14″
MAIN SPINDLE SPECIFICATIONS (L):
Spindle Nose………………………. A2-6
Spindle Bore………………………. 2.99″
Maximum Bar Work…. ……………… 2.0″
Spindle Speed……………………… 35 – 5000 RPM
Spindle Index (Programmable)………… 0.0001 Degree
Spindle Horsepower (Cont./30 Mins.)….. 20/30 H.P. (A.C.)
Spindle Torque (25% ED)…………….. 344.2 ft-lbs
SECOND SPINDLE SPECIFICATIONS (R)
Spindle Nose………………………. A2-6
Spindle Bore………………………. 2.99″
Maximum Bar Work…………………… 2″x 34.6″ deep from chuck face
Spindle Speed……………………… 35 – 5000 RPM
Spindle Index (Programmable)………… (0.0001 Deg. C-Axis )
Spindle Horsepower (Cont./30 min)……. 20/25 HP (A.C.)
Spindle Torque (30 min.)……………. 241 ft-lbs
TURRET AND TOOLING SPECIFICATIONS:
Magazine Capacity………………….. 80 Tools
ATC Tool Shank…………………….. KM63
Rotary Tool Spindle Speed…………… 12,000 RPM
Equipped With (subject to buyer verification):
MATRIX CONTROL
AUTO PECKING CYCLE WITH LOAD DETECTION
RE-THREADING FUNCTION
THREAD START POINT COMPENSATION
PREP FOR VISUAL TOOL ID/DATA MANAGEMENT/FOR 80T KM MAGAZINE
1ST SPDL&MILL SPDL IND.ROTATION(REQ EIA)
PREPARATION FOR MULTI & FLASH SYSTEM
F)EIA/ISO FUNCTION
SIMULTANEOUS 5 AXES
F)TOOL TIP POINT CONTROL /SIMULT. 5 AXES
F)TOOL RADIUS COMPENSATION / 5-AXIS
AUTO POWER ON/OFF + WARM-UP
10″ CHUCK B-210A615/4200RPM (1ST SPD.) THRU-HOLE CYL.S1875
8″ CHUCK B-208 SECOND SPINDLE WITH NON-THRU HOLE CYL. Y-1225