Mazak Integrex e-1550V/10II CNC Vertical Boring Mill
Specifications (subject to buyer verification):
Capacity
Max. workpiece diameter 78.74”
Max. workpiece height 56.69” when optional 39.37” tapped pallet is used
X-axis stroke (table back & forth) 73.82”
Y-axis stroke (spindle right/left motion) 61.02”
Z-axis (vertical spindle motion) 52.95”
Distance between B-axis rotation center & Pallet Center 69.88” in Home Position
Distance between spindle nose & Pallet Center 58.07”
Distance between B-axis rotation center and pallet top 3.94 to 56.89” when optional 39.37” tapped pallet is used
Distance between spindle nose and pallet top (B-axis = 0 Deg) –7.87 to 45.08” when optional 39.37” tapped pallet is used
Milling Spindle
Milling spindle taper hole 7/24 taper, No. 50
Milling spindle rotational frequency 25 to 10,000 RPM
Number of milling spindle speed shifts 2 (electric)
I.D. of milling spindle bearing 3.94”
Milling spindle motor 30 min rating / Cont 50 / 40 HP
Max. torque (1 min. rating) 372.5 ft·lbf)
Feed Rate
Rapid traverse rate 1653.4 IPM
Maximum cutting feed rate 1653.4 IPM
Table
Turning spindle speed 5 to 300 RPM
Number of turning spindle speed shifts 2 (electric)
Turning spindle motor 30 min rating / Cont 50/40 HP
Pallet change time 25 s
Table indexing 0.0001° x 3,600,000 positions
Table indexing time 4.2 s/90 Degree
Height of pallet top from floor level 58.07” when an optional 39.37” tapped pallet is used.
Tool storage capacity 80 tools
Tool shank type 50 Taper
Max Tool Diameter5.31” / 10.24” Adj Empty
Max Tool Length 25.59”
Max Weight of Tool66 lbs
Machine Dimensions (2-Pallet changer / 40 ATC)382” x 254” x 181”
Machine Weight (2-Pallet changer / 40 ATC)100,751 lbs
Equipped With (subject to buyer verification):
MAZATROL MATRIX CONTROL
Automatic Two (2) Pallet Changer with Automatic Front Door Open/Close & Safety Cover
NC Rotary Table (Full contouring, 0.001B increments)
NC Tilting Spindle (Full contouring, 0.0001B increments)
Full Coverage Chip & Coolant Enclosure
Complete Coolant System with large reserve tank capacity:
Through-the-Spindle Coolant – Provides high-pressure coolant at the tool 105 PSI.
Flood Coolant System – Provides High Pressure Coolant at Spindle Nose
Niagara Coolant System
Chip Conveyor
DOUBLE INTERNAL CONVEYORS(WEAR-RESISTANT
80 TOOL CHAIN MAGAZINE
1000mm Square Location Bore Tapp Pallet (1 Piece)
1400 Dia. 4-Jaw Indpenedt Chuck
WORK MEASURING SYSTEM
Overload Detection System
TOOL EYE (AUTOMATIC)
NC4 LASER ROTARY TOOL LENGTH MEASUREMENT W/AIR W/O MACROS
LASER MEASUREMENT NC4 MACRO UPGRADE ONLY
HOBBING FUNCTION W/O TOOLING
AUTO PECKING CYCLE WITH LOAD DETECTION
RE-THREADING
MAZAK SUPER FLOW V8A VARIABLE HIGH PRESSURE COOLANT (200-1000 PSI)