+GF+ MIKRON HSM 500 3-Axis High Speed Machining Center:
-WORK TABLE-
Clamping surface………………….. 550 mm x 450 mm (21.7″ x 17.7″)
Max table load…………………………………. 200 kg (441 lbs)
Height of table top front floor……………………. 980 mm (38.6″)
T-slot on table (nominal size x pitch x quantity)……. 14 x 63 x 7 mm
WORK AREA-
Longitudinal, X………………………………….. 500 mm (19.7″)
Lateral, Y………………………………………. 450 mm (17.7″)
Vertical, Z……………………………………… 350 mm (13.8″)
-STEP TEC Swiss made SPINDLE-
100-42,000 RPM, HSK-E40 taper………. 11 kW/4.2 Nm (14.75 hp/3 lb/ft)
-FEED RATE-
Feed rate/Rapid traverse (X,Y)…………. 20/40 m/min (787/1,575 IPM)
Feed rate/Rapid traverse (Z)………………. 40/40 m/min (1,575 IPM)
-OPTIONAL EXTENDED TOOL CHANGER-
Positions…………….. 36 (Standard on this machine is 18 stations)
-DIMENSIONS AND WEIGHT-
Machine dimensions (W x D x H) 1750 x 2250 x 2100 mm (69″ x 89″ x 83″)
Machine weight………………………………. 5500 kg (12,125 lb)
HEIDENHAIN iTNC 530 with electronic movable handwheel
Interface Ethernet
25 GB Harddisk capacity
Machine enclosure with polycarbon
Work area light
Safety switches
Vector drive spindle (high torque)
Rigid tapping
HEIDENHAIN optical linear scales with compressed air protection
Liquid cooled spindle, drives, electrical cabinet
3 user-definable M codes
ITC (Intelligent Thermal Control)
APS (Advanced Process System)
Air gun
-OPTIONS THIS MACHINE HAS-
Laser tool measuring
M&H measuring touch probe
Chip sump with coolant tank and chip flushing pistol
Tool blow-off unit
Oil mist minimum lubrication spray unit
Miscellaneous HSK-E40 tool holders: collet and shrink fit (photo 064418-10)