Nakamura NTRX-300 CNC Turning Milling Machine
Date of Mfg. 2016-3
Approximate Power ON hours…… 37780H 22M
Approximate Run Time Hours……. 14574H 48M
NT-Smart-X controller
12″ Chuck on main and sub spindle
Ugraged 1000 psi Chipblaster high pressure coolant
80 position tool changer
Part gripper for loading and unloading
REPLACEMENT COST FOR ABOVE MACHINE AS EQUIPPED “NEW” $570,000.00 USD
Hole through draw tube……………… 3.19 (81) in (mm)
Specifications:
CAPACITY
MAX TURNING DIAMETER………… 25.2 (640) in (mm)
MAX TURNING LENGTH……………. 45.3 (1150) in (mm)
DISTANCE BETWEEN SPINDLES…………. 53.1″
Y-AXIS STROKE………………………… 9.84″
BAR CAPACITY L-SPINDLE…………..3.15 (80) in (mm)
BAR CAPACITY R-SPINDLE…………. 3.15 (80) in (mm)
AXIS TRAVEL
SLIDE TRAVEL (Y)……………………… 9.9 (250) (±4.9 (125)) in (mm)
RAPID FEED (Y)………………………… 1417 (36) in/min (m/min)
SLIDE TRAVEL (B2-AXIS)……………. 43.3 (1100) in (mm)
RAPID FEED (B2 AXIS)………………. 1063 (27) in/min (m/min)
MAIN SPINDLE
SPINDLE SPEED………………………. 3500 rpm
SPINDLE NOSE……………………….. A2-8
BAR CAPACITY……………. 3.2 (80) in (mm)
HOLE THROUGH SPINDLE……….. 3.35 (85) in (mm)
DRIVE MOTOR POWER……………. 30 HP (DIRECT DRIVE)
CHUCK SIZE……………………………. 12″
SUB SPINDLE
SPINDLE SPEED………………………. 3500 rpm
SPINDLE NOSE……………………….. A2-8
BAR CAPACITY………….. 3.2 (80) in (mm)
HOLE THROUGH SPINDLE……….. 3.35 (85) in (mm)
RIGHT SPINDLE……………………… 30 HP (DIRECT DRIVE)
CHUCK SIZE…………………………… 10″
TOOL SPINDLE
SPINDLE SPEED……………………… 12,000 rpm
TOOL SPINDLE MOTOR…………… 25/15 HP
TOOL SHANK TYPE…………………. Capto C6
SWIVELING RANGE………………… 225°(-120°, +105°) degree
CLAMP FUNCTION…………………. Curvic coupling (5 degree) Brake (0.001 degree)
TOOL CHANGER
NUMBER OF POSITIONS…………. 80 TOOLS
ATC TIME (TOOL TO TOOL)……… 1.5 sec
Equipped with:
NAKAMURA NT SMART X CONTROLLER
CHIPBLASTER HIGH PRESSURE COOLANT SYSTEM (1000 PSI)
FILTERMIST S800 OIL MIST COLLECTOR
12″ InoFlex CHUCK (made in Germany) – LEFT SPINDLE
10” InoFlex CHUCK (made in Germany) – RIGHT SPINDLE
LOAD/UNLOAD CAPABILITY: (2) PART CONVEYORS PART CATCHER
PART GRIPPER FOR LOADING AND UNLOADING
40 PIECES CAPTO C6 SANDVIK TOOLING ($25000 VALUE) AVAILABLE
CAPTO C6 TEST BAR 300MM
FIXED AIR BLOW FOR BOTH SPINDLE
CHIP CONVEYOR FOR RIGHT SIDE DISCHARGE WITH INTERMIT TIMER
LNS BARFEED INTERFACE, QUICK LOAD SERVO
AUTO SWING IN TOOL SETTER
AUTO TOOL SET SOFTWARE
HELICAL INTERPOLATION
SPEED OVERRIDE (L/R)
C AXIS FUNCTION INCLUDING BRAKE (L/R)
FIXED TYPE AIR BLOW FOR SPINDLE
NT NURSE II SYSTEM
NT WORK NAVIGATOR
NT COLLISION GUARD