Okuma 2SP150HM with OGL-3 Loader
Parallel 2-Spindle Lathe with Robot Loader
Specifications (subject to buyer verification):
2-Axis, Twin Parallel Spindle Lathe with Std. Bore Spindle
Max Recommended Turning Diameter: 5.91” [8.66” in manual handling]
Max turning length: 3.15” [5.91” in manual handling]
X-Axis Travel: 5.91”
Z-Axis Travel: 6.10”
Rapid Travels IPM: X (945); Z (945)
Floor Space (W x D x H): 96.5” x 85” x 102” (without rear discharge chip conveyor, optional)
Weight: 11,023 lbs. (includes loader)
Turning Spindles (Left and Right)
Standard Bore configuration Included
Spindle nose 140mm Flat
50-4500 RPM range
14.75/10 HP, 67.9/46.4 ft-lbs torque, 30 min/continuous
Spindle bearing ID 3.15”, spindle bore 1.65”
Turret
(2) 12 Station Turret, Radial TypeIncluded
Non-lift hydraulic turret clamping, 562 lbf clamping force
6.26” curvic coupling
0.19 seconds per index
Through the turret coolant
Mill / Drill / Tap with M Spindle Turret Included
Milling Speed Range is 100 – 6,000 RPM
Drilling / Boring / Milling
Timing Grears Permit re-tapping
Flex Cycles for End Face and OD Cutting
Max Power: 2.7 kW (3.60 HP)
Max Torque: 12 N-m (8.8 lbf-ft)
OGL-3 Loader Specifications
Prep for OGL-3 LoaderIncluded
Auto Moon Roof
Work Piece Turn Over Device
Enclosure for Loader
OGL-3 Loader Specifications
Max Workpiece Size: 5.91” Dia x 3.15 Long
Max Load: 6.6 lbs.
3-Axis Servo Drive Feedrates:X (5,904 ipm), Y (4,728 ipm), Z (2,160 ipm)
Gripper Jaw Stroke: 1.16” Diameter for 3-Jaw Chuck, (2) Hands
OGL-3 Gantry Loader Kit AIncluded
Gantry Rail, Single Carrier and Double Handed Gripper
(1) Work Table with 16 Stations, Double Lift and (3) Pole Guides (Table used for Rough and Finished Work Pieces)
Table Located on Right Side of Machine
Gantry Enclosure
OGL-3 Gantry Loader Kit C (16 Station, 2-Lift)17,700
Adds a Second Work Table to Kit F. (One Table for Rough Material, the Second Table used for Finished Work Pieces)
Tables Located on Left and Right Sides of Machine
One carrier, one turn-over station and 2 stackers
Qty. (4) Combination Jaws for Loader4,320
Qty. (2) Combination Jaws for Turnover Device1,480
Work Flow Changeable Spec1,240
Equipped With (subject to buyer verification):
OSP P300LA THiNC Advanced Control
15” Color LCD ScreenIncluded
120GB Solid State Hard DriveIncluded
4GB RAM StorageIncluded
Windows Operating SystemIncluded
Ethernet + 4 (USB Ports)Included
Chuck O/C During Spindle RotationIncluded
Common Variables (200 sets)Included
Electric Spindle OrientationIncluded
Inch/Metric SwitchableIncluded
LAP-4 (canned lathe cycles and subroutine calling)Included
Load MonitorIncluded
NC Work CounterIncluded
Rapid Traverse Override Switch (separate work feed and rapid controls)2,160
Signal TowerIncluded
Spare M-Codes, 4 Sets2,320
Synchronized Tapping, Main Spindle2,520
Tool Life ManagementIncluded
Tool Offsets (32)Included
Tool Wear CompensationIncluded
C.Accuracy
Thermal Compensation (TAS-C)Included
8″ hydraulic hollow chuck B-208, draw tube, and hydraulic cylinder 2R-120-/21-25-01RFEQ
Includes 1 set of spare chuck jaw blank type A
Chuck Air BlowIncluded
Tool Touch Setter – Manual Type Swing Down from Firewall13,780
Chip Conveyor – Hinge with Filter, HighIncluded
Chip Conveyor – Rear Discharge Style (factory only)6,820
Conveyor Control By M-Code3,620
Okuma High Output Flood Coolant System, (2) 6gpm at 100psi pumpsIncluded
Thru Spindle Coolant, Left and Right12,620
Multi-Tap Transformer – 50/60HZ5,220