Mazak Integrex 2004ST Multi-Axis CNC Turning with Milling Center
Specifications (subject to buyer verification):
Maximum Swing……………………… 26″
Maximum Swing Using Y-Axis………….. 19.5″ – 26″
NOTE: Limited to 12.99″ when lower turret is
in operating range without tools mounted.
Maximum Swing over Lower Turret……… 10.6″
NOTE: Without tools or holders on lower
turret.
Maximum Cutting Diameter: Chucking…… 26″ (Upper)
Maximum Cutting Diameter: Chucking…… 10.24″ (Lower)
NOTE: Without boring bar holder mounted.
Maximum Cutting Length 60″………….. 58.85″
Maximum Distance Between Chuck Jaws 60″. 60.83″
MAIN SPINDLE SPECIFICATIONS (L):
Spindle Nose………………………. A2-6
Spindle Bore………………………. 2.99″
Maximum Bar Work…. ………………. 2.5″
Spindle Speed……………………… 35 – 5000 RPM
Spindle Index (Programmable)………… 0.0001 Degree
Spindle Horsepower (Cont./30 Mins.)….. 20/30 H.P. (A.C.)
Magazine Capacity………………….. 40 Tools
ATC Tool Shank…………………….. CAT40
Rotary Tool Spindle Speed…………… 12,000 RPM
Equipped With (subject to buyer verification):
Mazatrol Matrix Control
Lower Turret w/o milling)
40-Tool Magazine
CAT-40
Cylindrical Interpolation G07
EIA/ISO Spindle & Mill Independent Rotation
X,Y,Z Error Compensation
Chuck / Open Close Confirmation
9-Station Lower Turret
71-PSI Through Spindle Coolant
2nd Spindle C-Full C-Axis
Mill-Spindle Synchronous Tapping
Automatic Parts Catcher
Chip Conveyor Hinge Side Discharge
C1&C2 Synchronous Spindle Orientation
Barfeed Interface For An LNS Quick Servo S3 Barfeeder
8” Chuck On Main Spindle W-2.5” Bar Capacity
8” Chuck On Rear Spindle