2022 DMG MORI NTX1000SZM GEN II MULTI AXIS CNC LATHE
SPECIFICATIONS:
Left spindle (Main spindle): Left Spindle) through-spindle hole dia. 73 mm, 5,000min-1 for FANUC)
Right spindle (Counter spindle): Standard spindle (Right Spindle) 11/7.5 kW, 6,000min-1 for FANUC)
Chuck for Left spindle (Main spindle) : Left Spindle) KITAGAWA 8in. Hollow Chuck BROBA621 (SK-OP)
Cylinder Set for Left Spindle (Main Spindle): (Left Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA Bin Hollow Chuck BR08A621/BR08-21B (Bar work capacity dia. 65 mm (2.55 inch)) (without chuck body)
Chuck for Right spindle (Counter spindle): Right Spindle) KITAGAWA 6in. Hollow Chuck BROGA521F
Cylinder Set for Right Spindle (Counter Spindle): Right Spindle) KITAGAWA Hollow Cylinder set for KITAGAWA 6in. Hollow Chuck BR06A521F/BR06-21D Bar work capacity dia. 52 mm (2.04 inch)) (without chuck body) (SK-OP)
Turn-mill Spindle Option: High-speed Turn-mill Spindle, 20,000 min-1, 9/5.5 kW, 49.4 Nm (15%EDy21.9 Nm (C5/HSK-A50)
Grip: Capto C5Tool
Tool Spindle Indexing Type: Turn-mill Spindle full indexing specifications (STD)
Turret 2 : 10 Station Bolt-Tightened Turret, Miling Spindle (10,000 min-1, 1.5/1.2 kW, 4.8/2.3 Nm) (Turet 2) (for FANUC)
Magazine : Tool storage capacity 76 tools (Capto C5)
Usable Coolant Type: Usable Coolant Type: Water Soluble Coolant
Chip Related: Chip conveyor (right discharge, hinge type drum fiter type)
Coolant Pump Option: Interface for Super-high-pressure coolant system (7.0 MPa, Variable Pressure Steps, KNOLL/ Interlit, for 2-path system) (Coolant system for Through Spindle (Turn-mill Spindle) and Turet 2)
Air blow for chuck (Left Spindle) : Air blow for chuck (Left Spindle)
Air blow for chuck (Right Spindle): Air blow for chuck (Right Spindle)
Mist Collector: Interface for Mist collector (duct only, dia. 200 mm) (SK-OP)
Machine Tool Preseter : Manual in-machine tool presetter (removable type) (Left Spindle) (STD) In-machine workpiece measuring system radio signal
Machine Workpiece Measuring System : Transmission type touch sensor (RENISHAW, RMP600) (SK-OP)
Automation Support: Workpiece unloader (Right Spindle, workpiece receiver type) + Workpiece unloading conveyor+ Workpiece stocker
Interface for Bar feeder: Interface for Bar feeder (EtherNet/IP Interface) with berminal block for power supply, TYPES
Right Spindle workpiece ejector (SK-OP): Right Spindle workpiece ejector (SK-OP)
Interface for EtherNet/IP (SK-OP): Interface for EtherNet/IP (SK-OP)
3D quickSET (FANUC)
Tailstock for turret
Keyway broaching (FANUC) (SK-OP)
EQUIPPED WITH:
Fanuc F31185
CELOS-ERGOline Touch
CAPTO C5 MILLING SPINDLE
76 TOOL MAGAZINE
10000 RPM LOWERT TURRET MILLING
SUB-SPINDLE
PARTS EJECTOR
PARTS UNLOADER
PART STACKER
20000 RPM MILLING SPINDLE
INTERFACE FOR SUPER HIGH PRESSURE COOLANT
THROUGH SPINDLE COOLANT READY FOR TURN/MILL SPINDLE AND TURRET 2
AIRBLOW LEFT AND RIGHT SPINDLE
INTERFACE FOR MIST COLLECTOR
RENISHAW RMP600 IN MACHINEWORKPIEACE MEASURING
TOOL PRESETTER
BARFEED INTERFACE
KEYWAY BROACHING
ADDITION OF OPTIONAL BLOCKSKIP
3D QUICKSET
LEFT SPINDLE 73MM 5000RPM
RIGHT SPINDLE 52MM
CHIP CNVEYER RIGHT DISCHARGE
2673 CUTTING TIME MAIN SPINDLE
117 CUTTING TIME SPINDLE 2