Haas HRT210SP Rotary Table
HRT210SP
The HRT SP Series gives you the same features and benefits as the standard HRT Series, but the motor is wrapped behind the table to provide a substantially shorter overall length, and help you fit a lot of table into a small work envelope. Note: SP models do not have a through hole. The bore depth is the thickness of the platter.
Note: Requires a Haas mill with 4th-axis drive and NGC software version 100.21.000.1130 or later for full 4th-axis operation. Stand-alone operation requires a Haas rotary control box shipped after November 10, 2021, with software version 26.38 or newer.
Specifications (subject to buyer verification):
Platter
Platter Diameter: 8.30 in
Max Weight on Platter (w/support) : 170 lb
Max Weight on Platter (unsupported) : 85 lb
Number of Std T-Slots: 6 @ 60°
Spindle
Max Speed: 100 °/sec
Torque (Continuous) : 210 ft-lbf
Runout Max: 0.0005 in
Center Height: 6.000 in
Backlash: 30 arc-sec
Brake Torque @ 100 psi/6.9 bar: 200 ft-lbf
Gear Ratio: 90:1
Timing: 2:1
Indexing
Accuracy (±): ± 15.0 arc-sec
Repeatability: 10 arc-sec
Resolution: 0.001 °
Worm Gear Dia: 6.3 in
Max Rotation/Step (with rotary control) : 999.999 °
General
Power Requirement: 115 VAC ±10% @ 15 A
Operating Temp (max ambient) : 100 °F
Air Requirements
Air Pressure Max: 150 psi