Mazak Integrex 2004ST Multi Axis CNC Lathe – Sub Spindle, Y Axis, Lower Turret
SPECIFICATIONS:
# AXIS 6
SWING 26″
MACHINING LENGTH 60″
CHUCK SIZE 8″
BAR CAPACITY 2.55″
POWER 30 hp
MAX RPM 5,000 RPM
TURNING DIA 26″
TAILSTOCK No
CONTROL CNC (Mazatrol Matrix CNC Control)
DIMENSIONS 160 in x 93.0 in x 110.2 in
WEIGHT 26,840 lbs
Capacity:
Max Turning Diameter: 26.0″
Max Turning Length: 60.0″
Max Bar Capacity: 2.55″
Max Swing Over Bed: 26.0″
Max Swing with Y-Axis: 19.70″
Max Weight on Main & Sub Spindle: 660 lbs
Travel:
X Axis Travel: 22.83″
Y Axis Travel: 6.30″ ( +/- 3.15)
Z Axis Travel: 60.83″
W Axis Travel: 58.66″ (Sub Spindle)
B Axis Travel: 225 Degree
C Axis: 360° (0.001°) Both Spindle
X Rapid Traverse Rate: 1496 Inch Per Minute
Y Rapid Traverse Rate: 1093 Inch Per Minute
Z Rapid Traverse Rate: 1496 Inch Per Minute
Spindle:
Main Spindle Nose: A2-6
Sub Spindle Nose: A2-6
Main Spindle Bore: 2.99″
Sub Spindle Bore: 2.99″
Main Spindle Speed: 35 – 5000 RPM
Sub Spindle Speed: 35 – 5000 RPM
Main Spindle Motor: 30 HP
Sub Spindle Motor: 25 HP
Milling Head:
Single Station Pendulum Head with 40 ATC
Tool Type: KM-63, 40 Taper
Max Tool Diameter: 3.54″
Max Tool Length: 11.81″
Spindle Speed: 15-12,000 RPM
Spindle Motor: 25 HP
Spindle 90° Index Time: 0.5 sec
Lower Turret:
Capacity: 9 Stations
Turret Index Time: 0.14 Second
OD Tool Size: 1.00″
General:
Power Source: AC 400 V, Three Phase, 50/60 Hz
Power Requirement: 91.8 Kva
Overall Dimensions: 160″ x 93.0″ x 110.2″ High
Weight: 26,840 lbs Approx.
EQUIPPED WITH:
Mazatrol Matrix CNC Control
TR1 – 10,751 Hours TR2 – 3,364 Hours Cutting Time
Linear Ways Construction
EIA/ISO Programming
3D Coordinate Conversion
Rigid Tapping
PCMCIA Card Slot
Coolant Tank
12,000 RPM Pendulum Milling Head
40 Station Tool Magazine
9 Station Lower Turret
Sub Spindle
Servo Controlled Full C-Axis on Both Spindles
Y Axis Capability
8″ Chuck on Main Spindle
8″ Chuck on Sub Spindle
High Pressure Coolant
Foot Operated Control for Chuck
Chiller Unit
Chip Conveyor